Description
IntelliKnight’s addressable pull stations combine fast response with pin-point location ID.
The SD500-PS and SD500-PSDA are a single action or dual action addressable manual fire alarm pull station for use with Silent Knight’s IntelliKnight fire control panel. Extremely easy to operate, the SD500-PS/PSDA provides a fast and practical means of manually initiating a fire alarm signal. The IntelliKnight panel recognizes each manual pull station by its specific address saving precious seconds in determining the location of an alarm. The SD500-PS/PSDA mounts to a single gang box and features a rugged metal construction that lasts and lasts.
Combine all this with the features you’ve come to expect from Silent Knight – easy installation and stable operation – and it adds up to a flexible solution for all your fire protection needs.
Model SD500-PS & SD500-PSDA Addressable Pull Station
The SD500-PS is a single action addressable fire pull station, and the SD500–PSDA is a dual action addressable fire pull station. The SD500-PS/PSDA feature rugged metal construction A terminal strip on back of the pull station allows interconnection of the pull station to the SLC of an IntelliKnight control panel. The SD500-PS/PSDA is designed for indoor use in nonexplosive environments. The normally open initiating point contacts are gold-plated to avoid risk of corrosion. The SD500- PS/PSDA has been tested by UL for compliance to the requirements of the Americans with Disabilities ACT (ADA).
Single Action Pull Station Features
- UL Listed
- CSFM listed
- ADA compliant
- Key reset (Same key as Silent Knight enclosures)
- Surface mount back box available
- Terminals – accept up to 14 gauge wire
- Extremely easy to operate
- Corrosion-resistant gold-plated contacts.
- Reflective label makes it easier to locate in low light
Operation
Operate the SD500-PS/PSDA pull stations by pulling on the front pull cover of the station. A plunger switch, wired to a self contained addressable module, is released as the pull station opens to initiate the alarm. Once operated, the cover hangs down and can be seen up to 100 feet away. Reset the station by returning the front cover to the normal upright position and relocking the station with a reset key. The reset keys and Silent Knight enclosure keys are the same.
The SD500-PS/PSDA includes a status LED which blinks, indicating that the addressable module is communicating with the loop. The status LED lights continuously during an alarm. Use a dip switch on the addressable module to set the unique address.
