Description
NV-216A-PV Video Transceiver with Power is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Supports baseband (composite) signals of any type.
NV-216A-PV video transceiver allows transmission of CCTV video and low voltage power over UTP cable. The NV-216A-PV incorporates the transceiver engine of NVT’s popular NV-214A-M video transceiver with the added value of camera power connections. Routs Power and Video via UTP and RJ45 connections.
Used at the camera, the passive NV-216A-PV has a compact body, a male BNC for direct connection to the camera, and is compatible with NVT’s PVD™ product line. Connect the RJ45 to 4-pair cable to be routed to the NVT Phybridge cable integrator and on to an active or passive receiver hub in the MDF/Control Room.
Passive Transceiver Features
- Power-Video (PV) signals are routed via UTP and RJ45
- Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
- Use with NVT’s PVDTM Power Supply Hubs and Cable Integrators, or with a second NV-216A-PV
- Up to 750ft (225m) with a NVT Passive Hub or Transceiver
- Frequency response DC to 10MHz (see Resolution Distance Chart)
- Supports “up-the-coax” type control signal up to 750ft (225m)
- Up to1,500ft (460m) with a NVT StubEQTM Hub
- Exceptional interference rejection
- Built-in transient protection
- Limited lifetime warranty
