Description
The DS1102i Detector Series uses micro processor based sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass. The DS1102i and DS1102i-CHI can be used to detect breakage of plate, tempered, laminated and wired glass types. A built-in environmental test feature alerts the installer to false alarm hazards in harsh environments. The square detectors mount on ceilings or walls.
Square detector uses microprocessor-based sound analysis technology (SAT) to listen for the specific frequencies associated with breaking glass.
Square Glass Break Detector Main Features
- Microprocessor-based sound analysis technology (SAT)
- Automatic environmental test circuitry
- Sound check
- Mount the DS1102i series detectors on the ceiling, or on the wall opposite or adjacent to the window. Coverage depends on room acoustics and window size.
- Standard Coverage 7.6 m (25 ft) for glass sizes over 30.5 cm x 30.5 cm (12 in. x 12 in.).
- Current: 23 mA at 12 VDC
- Voltage: 6 VDC to 15 VDC
- Dimensions: 8.6 cm x 8.6 cm x 2.1 cm (3.4 in. 3.4 in. x 0.83 in.)
- Material: High-impact ABS plastic enclosure
- Alarm Output: Form C reed relay rated 3.5 W, 125 mA at 28 VDC for resistive loads.
- Tamper Output: Normally-closed (NC) cover-activated tamper switch with separate terminals. Contacts rated at 28 VDC, 125 mA maximum.
