Description
The ANCP3005Q Wireless CPE Bridge allows for transmitting signal from IP cameras up to 6 miles away (line-of-sight)*. By utilizing a Qualcomm chipset and the 5.8GHz WiFi spectrum, the ANCP3005Q is not susceptible to the usual interference and signal issues that other wireless bridges can encounter.
You can also power a single IP camera by utilizing the PoE output port on the ANCP3005Q, which can save the trouble of running another CAT5 cable to power the camera.
* Two ANCP3005Q devices are required to successfully transmit signal wirelessly.
Main Features
- High Power Indoor/Outdoor CPE with Qualcomm® Atheros Chipset: Range up to 6 miles away with line of sight
- Can be used to connect remote IP cameras to existing NVR’s / DVR’s: Supports up to 300Mbps
- Utilizes the 5.8Ghz Wi-Fi frequency, avoiding the congested 2.4Ghz bandwidth in use on most Wi-Fi today.
- 14dBi antenna
- Supports the following operation modes: Bridge, Access Point, Router and Repeater
- Supports providing PoE power to a single IP camera attached to CPE
- Includes 48V PoE power injector which allows for powering CPE from up to 330ft. away
- LEDs provide information about system status and signal strength for alignment in Bridge mode
- Hardware Reset button
- Outdoor Rated down to -40°F
