Showing 1–16 of 108 results
$ 1,434.84Only 1 left in stock
Each unit includes four onboard fully supervised audio circuits which are expandable to eight circuits when an ECC-CE4 module is added
Any combination of up to eight ECC-50DA(E)s or ECC-125DA(E)s per system for a total of 1100 watts of audio power and 24 speaker circuit outputs.
Supports both Class A (Style Z) and Class B (Style Y) wiring.
$ 252.44Only 3 left in stock
Supports two receivers with two phone numbers each
Progra mming from front panel controls or PC with appropriate software
Can function as a modem
$ 429.07In stock
Fully supervised trigger inputs require a contact closure for activation.
12- or 24-VDC operation, jumper-selectable.
Industry-first, UL recognized, “dialer-runaway” prevention feature.
$ 467.99Only 18 left in stock
Trigger inputs require a contact closure for activation
Inputs may be individually programmed to monitor the host control panel
Includes 15 reporting formats, including the popular ADEMCO Contact ID format
$ 657.98In stock
Flexible and configurable to meet your communication and central station requirements.
Four supervised monitoring channels (inputs):
Three fixed Style B (Class B) and one Style A (Class A) or Style B (Class B).
$ 612.52In stock
UL Listed to UL 2572 Communication (Control Units Mass Notification Systems) and UL 864 (emergency voice evacuation for fire)
Modular design for system flexibility and easy expansion
Removable terminal blocks for ease of servicing and module replacement
$ 562.60In stock
Fire-Lite ECC-CE6 Speaker Circuit/Zone Expander Module
$ 865.99Only 11 left in stock
External remote console that provides ALL CALL paging broadcasts over the speaker zones of the ECC-50/100(E) primary operating console.
Modular design for maximum system flexibility and easy expansion.
Supports both Class A (Style Z) and Class B (Style Y) wiring.
$ 2,587.04In stock
SBUS addressable, up to four EVS-125w per system
Each EVS-125W is supervised and has four onboard audio circuits expandable to eight with the EVS-CE4
EVS-125W uses an easy to install wire harness to connect the ECS-CE4 audio circuit expander
$ 1,327.93In stock
ntegrates directly with Silent Knight Series 6000 panels. Installation is easy as there is no need for special programming or a separate dialer capture module
Battery backup provided by the fire alarm control panel for enhance efficiencies and cost savings
Communicators provide dual path cellular and IP reporting capability when combined with 6000 series panels
$ 324.71Only 2 left in stock
Silent Knight EVS-CE4 Fire Alarm Control Panel Audio Expander
$ 145.43Only 6 left in stock
4G LTE Network and IP Compatibility
Full Contact ID
256-bit AES Encryption
Diagnostic LEDs
$ 3,042.41In stock
UL Listed to UL2572 Communication (Control Units Mass Notification Systems).
Modular design for maximum system flexibility and easy expansion.
50 watts of 25 V audio power (expandable to 100 watts) RMS.
$ 435.59Only 15 left in stock
Supports most common alarm formats: Contact ID, SIA2, pulse (3×1, 4×2), modem lle, IIIa, and DMP
Transmits fire alarm signals through the Telguard Communication Center
Compliant with 2019 and earlier editions of NFPA 72
$ 323.99In stock
LTE and IP connection tested every day
Use the 7AH battery (not included) to provide 24 hour backup capability
Three selectable reporting paths: LTE cellular only, IP only, or IP Primary with LTE cellular backup
$ 318.94In stock
Single or Dual Path Communications – Communicates using Internet, LTE Cellular, or both
IP Communications – Works over any type of customer provided Ethernet 10/100
Base network connection (LAN or WAN), DSL modem or cable modem
Supports both dynamic (DHCP), or public and private static IP addressing
Fire alarm communication devices are crucial for ensuring effective and coordinated responses during emergencies. These devices enable clear and immediate communication between occupants and emergency responders, facilitating the quick relay of critical information. Our range of fire alarm communication devices includes emergency call boxes, intercom systems, and mass notification systems, all designed to provide reliable and efficient communication in various settings. Whether in a residential, commercial, or public space, these devices help ensure that everyone receives timely alerts and instructions, enhancing overall safety and response efforts during fire emergencies.
