{"title":"Detector Bases","description":"\u003cp\u003eShop our selection of fire alarm detector bases and mounting accessories from leading manufacturers including Potter, Kidde, Silent Knight, Fire-Lite, and Napco. Detector bases provide the mounting platform and electrical connections for addressable and conventional smoke detectors, heat detectors, and combination detectors. Our inventory includes standard 6-inch bases, low-profile bases, bases with built-in relays, bases with various terminal configurations, and wireless detector bases. Available in different current draws (93mA and other ratings) and voltage options to match your specific detector and fire alarm system requirements. Essential components for proper detector installation in commercial fire alarm systems.\u003c\/p\u003e","products":[{"product_id":"potter-sb-93-93ma-draw-at-24vdc-smoke-detector-base","title":"Potter SB-93 93mA Draw at 24VDC Smoke Detector Base","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003eThe SB Series is a 6\" polarized base with annunciator output featuring a current limiting resistor, and a blocking diode to enhance annunciator function. The SB Series Smoke Detector base is designed specifically for use with the Potter Smoke Detector Models IS-24, PS-24 and PS-24H.  \u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\" data-test-selector=\"OverviewTitle\"\u003e\u003c\/h3\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ ibJhda\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003e93mA draw at 24V DC\u003c\/li\u003e\n\u003cli\u003ePolarized smoke detector base\u003c\/li\u003e\n\u003cli\u003eCurrent limiting resistor\u003c\/li\u003e\n\u003cli\u003eBlocking diode\u003c\/li\u003e\n\u003cli\u003eDesigned for the IS-24, PS-24 and PS-24H smoke detectors\u003c\/li\u003e\n\u003cli\u003eCompatible with all Potter PFC 3000 and 5000 series panels, as well as the PFC 9000 series with a ZA9008 module added\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-pfc-5004e-microprocessor-based-4-zone-expandable-fire-alarm-control-panel\/\" rel=\"noopener\" target=\"_blank\"\u003e PFC-5004E\u003c\/a\u003e, \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-pfc-5008-microprocessor-based-8-zone-conventional-fire-panel\/\" rel=\"noopener\" target=\"_blank\"\u003e PFC-5008\u003c\/a\u003e,\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43244250005569,"sku":"PL-SB93","price":29.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/90e43543-pl-sb93_lg.jpg?v=1773116505"},{"product_id":"kidde-ki-abdt-audible-sounder-base-for-co-and-fire-detectors","title":"Kidde KI-ABDT Audible Sounder Base for CO and Fire Detectors","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\n\u003cb\u003eKI-ABDT\u003c\/b\u003e bases provide sounder capability to KI Series smoke and heat detectors, as well as carbon monoxide detectors when used with a GSA-T3T4 Temporal Pattern Generator\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003e\u003c\/h3\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eDesigned for use where localized or group alarm signaling is required.\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/kidde-kir-hcd-intelligent-multisensor-heat-and-co-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eKIR-HCD Heat and CO Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43246969684033,"sku":"ED-KIABDT","price":81.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/903ecca1-ed-kiabst_lg-1.jpg?v=1770772339"},{"product_id":"kidde-ki-abst-audible-sounder-base-for-fire-detectors","title":"Kidde KI-ABST Audible Sounder Base for Fire Detectors","description":"\u003cdiv class=\"sc-AxjAm eFWwQt\"\u003eKI-ABST bases provide sounder capability to KI Series heat and smoke detectors. They are not intended for use with combination carbon monoxide detectors in Fire-plus-CO mode.\n\u003ch4\u003e\u003cspan style=\"font-family: Lora, var(--global-fallback-font); font-size: 24px;\"\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4\u003e\u003cspan style=\"font-family: Lora, var(--global-fallback-font); font-size: 24px;\"\u003eMain Features\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-AxjAm kVNpUd\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eKI-ABST bases provide sounder capability to KI Series heat and smoke detectors.\u003c\/li\u003e\n\u003cli\u003eDesigned for use where localized or group alarm signaling is required.\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/kidde-kir-hcd-intelligent-multisensor-heat-and-co-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eKIR-HCD Heat and CO Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43246969716801,"sku":"ED-KIABST","price":77.44,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/e0f822ee-ed-kiabst_lg.jpg?v=1770770414"},{"product_id":"kidde-ki-ablt-low-frequency-sounder-base-for-co-and-fire-detectors","title":"Kidde KI-ABLT Low Frequency Sounder Base for CO and Fire Detectors","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003eKI-ABLT bases provide 520 Hz low frequency sounder capability to KI Series smoke and heat detectors, as well as carbon monoxide detectors when used with a GSA-T3T4 Temporal Pattern Generator. The KI-ABLT is suitable for applications requiring low frequency audible tones.\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch3 class=\"sc-bczRLJ iwaCMW\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003eMain Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eThe GSA-LED Remote LED is supported by this Base\u003c\/li\u003e\n\u003cli\u003eWide 0.53 to 3.94 %\/'. (1.7 to 12.35 %\/m) smoke obscuration\u003c\/li\u003e\n\u003cli\u003eUses Existing Wiring\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/kidde-kir-hcd-intelligent-multisensor-heat-and-co-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eKIR-HCD Heat and CO Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43246969815105,"sku":"ED-KIABLT","price":118.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/ad5b5a4f-418zqkt1pnl-1.jpg?v=1770772385"},{"product_id":"kidde-ki-sb4-standard-detector-mounting-base-w-4-inch-trim-skirt","title":"Kidde KI-SB4 Standard Detector Mounting Base w\/ 4-inch Trim Skirt","description":"\u003cp\u003estandard Detector mounting base has wiring terminals that are accessible from the \"room-side\" after mounting the base to the electrical box. The bases mount to North American 1-gang boxes and to 3½ inch or 4 inch octagon boxes, 1½ inches (38 mm) deep. They also mount to European BESA and 1-gang boxes with 60.3 mm fixing centers.\u003c\/p\u003e\n\u003cp\u003eThe KI-SB4, KI-RB4, and KI-IB4 mount to North American 4 inch sq. electrical boxes in addition to the above boxes. They include the GSA-TS4 Trim Skirt, which is used to cover the \"mounting ears\" on the base. The KI-ABST mounts to a 4 inch square box only.\u003c\/p\u003e\n\u003ch3\u003e \u003cstrong\u003eStandard Detector Mounting Base Main Features\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation optical smoke sensing technology\u003c\/li\u003e\n\u003cli\u003eWide 0.53 to 3.94 %\/ft. (1.7 to 12.35 %\/m) smoke obscuration\u003c\/li\u003e\n\u003cli\u003eUses Existing Wiring\u003c\/li\u003e\n\u003cli\u003eAutomatic Device Mapping\u003c\/li\u003e\n\u003cli\u003eUp To 250 Total Addresses Per Loop\u003c\/li\u003e\n\u003cli\u003eTwo Levels of Environmental Compensation\u003c\/li\u003e\n\u003cli\u003eTwo Levels of Dirty Detector Warning\u003c\/li\u003e\n\u003cli\u003eTwenty Pre-Alarm Settings\u003c\/li\u003e\n\u003cli\u003eFive Sensitivity Settings\u003c\/li\u003e\n\u003cli\u003eNon-Volatile Memory\u003c\/li\u003e\n\u003cli\u003eElectronic Addressing\u003c\/li\u003e\n\u003cli\u003eIdentification of Dirty or Defective Detectors\u003c\/li\u003e\n\u003cli\u003eAutomatic Day\/Night Sensitivity Adjustment\u003c\/li\u003e\n\u003cli\u003eBicolor (Green\/Red) Status Led\u003c\/li\u003e\n\u003cli\u003eStandard, Relay, Fault Isolator, and Audible Mounting Bases\u003c\/li\u003e\n\u003cli\u003eSensor Markings Provide Easy Testing Identification\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/kidde-kir-hcd-intelligent-multisensor-heat-and-co-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eKIR-HCD Heat and CO Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43246969782337,"sku":"ED-KISB4","price":14.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/b47b57ea-ed-kisb4_lg.jpg?v=1775080781"},{"product_id":"kidde-ki-sb-detector-mounting-base-standard","title":"Kidde KI-SB Detector Mounting Base Standard","description":"\u003cp\u003ekidde Detector mounting base has wiring terminals that are accessible from the \"room-side\" after mounting the base to the electrical box. The bases mount to North American 1-gang boxes and to 3½ inch or 4 inch octagon boxes, 1½ inches (38 mm) deep. They also mount to European BESA and 1-gang boxes with 60.3 mm fixing centers.\u003c\/p\u003e\n\u003cp\u003e The KI-SB4, KI-RB4, and KI-IB4 mount to North American 4 inch sq. electrical boxes in addition to the above boxes. They include the GSA-TS4 Trim Skirt, which is used to cover the \"mounting ears\" on the base. The KI-ABST mounts to a 4 inch square box only.\u003c\/p\u003e\n\u003ch3\u003e \u003cstrong\u003eKidde Detector Mounting Base Main Features\u003c\/strong\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNext generation optical smoke sensing technology\u003c\/li\u003e\n\u003cli\u003eWide 0.53 to 3.94 %\/ft. (1.7 to 12.35 %\/m) smoke obscuration\u003c\/li\u003e\n\u003cli\u003eUses Existing Wiring\u003c\/li\u003e\n\u003cli\u003eAutomatic Device Mapping\u003c\/li\u003e\n\u003cli\u003eUp To 250 Total Addresses Per Loop\u003c\/li\u003e\n\u003cli\u003eTwo Levels of Environmental Compensation\u003c\/li\u003e\n\u003cli\u003eTwo Levels of Dirty Detector Warning\u003c\/li\u003e\n\u003cli\u003eTwenty Pre-Alarm Settings\u003c\/li\u003e\n\u003cli\u003eFive Sensitivity Settings\u003c\/li\u003e\n\u003cli\u003eNon-Volatile Memory\u003c\/li\u003e\n\u003cli\u003eElectronic Addressing\u003c\/li\u003e\n\u003cli\u003eIdentification of Dirty or Defective Detectors\u003c\/li\u003e\n\u003cli\u003eAutomatic Day\/Night Sensitivity Adjustment\u003c\/li\u003e\n\u003cli\u003eBicolor (Green\/Red) Status Led\u003c\/li\u003e\n\u003cli\u003eStandard, Relay, Fault Isolator, and Audible Mounting Bases\u003c\/li\u003e\n\u003cli\u003eSensor Markings Provide Easy Testing Identification\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/kidde-kir-hcd-intelligent-multisensor-heat-and-co-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eKIR-HCD Heat and CO Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43246969880641,"sku":"ED-KISB","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/a1d71d13-ed-kisb4_lg-1.jpg?v=1770772339"},{"product_id":"fire-lite-b200sr-iv-intelligent-sounder-base-with-ansi-temporal-or-continuous-tone-intended-for-retrofit-applications-ivory","title":"Fire-Lite B200SR-IV Intelligent Sounder Base with ANSI Temporal or Continuous Tone, Intended for Retrofit Applications, Ivory","description":"\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eIntelligent mounting bases and kits provide a variety of ways to install Fire-Lite detectors in any application. Intelligent detectors can be mounted in either flanged or flangeless bases depending on junction box selection (see Junction Box Selection Guide). Across this product line, detectors plug in easily to the base with SEMS screws; and models employ various 12 to 24 AWG wire ranges. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe B200SR sounder and -LF sounder bases (B200SR-WH\/ B200SR-IV\/B200SR-LF-WH\/B200SR-LF-IV) are fully compatible with existing B501BH Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv id=\"pdp-overview-details\" aria-hidden=\"false\" class=\"sc-bczRLJ hiOsDu\"\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003e\u003c\/h3\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ ibJhda\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eSEMS screws provide easy Wiring connection\u003c\/li\u003e\n\u003cli\u003eSupport for 12-24 AWG provides installation flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246969978945,"sku":"FL-B200SRIV","price":91.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/2be8ab46-41anfhhi1al.jpg?v=1775081043"},{"product_id":"fire-lite-b200s-lf-programmable-sounder-base","title":"Fire-Lite B200S-LF-IV Intelligent Addressable Sounder Base, Low-Frequency, Ivory","description":"\u003ch4 class=\"product-title-description ai-optimize-33\"\u003eFire-Lite B200S-LF-IV and B200S-LF-WH Low Frequency Intelligent, Programmable Sounder Base,\u003c\/h4\u003e\n\u003cp class=\"ai-optimize-34 ai-optimize-introduction\"\u003eThe B200S-LF-WH and B200S-LF-IV sounder bases are used with addressable detector heads. Refer to the appropriate manual for more information on sensors. The B200S-LF-WH\/B200S-LF-IV low frequency sounder base generates a low frequency tone around 520 Hz. The B200S-LF-WH\/B200S-LF-IV offers maximum flexibility in configuration and operation to meet or exceed the requirements of UL268 and UL464 for Continuous, Temporal 3 and March time patterns. The temporal 4 pattern meets all requirements of UL268 and UL2075, as well as, private mode setting of UL 464.\u003c\/p\u003e\n\u003ch4 class=\"ai-optimize-35\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ai-optimize-36\"\u003eBase Diameter: 6.875\" (17.46 cm)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-37\"\u003eBase Height (less sensor): 2.0\" (5.08 cm)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-38\"\u003eExternal Supply Voltage: 16 to 33 VDC (VFWR)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-39\"\u003eStandby Current: 550 µA maximum VDC\u003c\/li\u003e\n\u003cli class=\"ai-optimize-40\"\u003eSLC Operating Voltage: 15 to 32 VDC\u003c\/li\u003e\n\u003cli class=\"ai-optimize-41\"\u003eSLC Standby Current: 300 µA maximum (base only, refer to applicable sensor specification)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-45\"\u003eThe detector should be cleaned at least once a year.\u003c\/li\u003e\n\u003cli class=\"ai-optimize-46\"\u003eAvailable in Ivory and White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire and Safety Plus","offers":[{"title":"Default Title","offer_id":43246970044481,"sku":"FL-B200SLFIV","price":155.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/7d13b474-41oaeb4i2nl_9e4fd41a-1497-46e7-8f86-a5394efaf141.jpg?v=1770772516"},{"product_id":"fire-lite-b200sr-lf-wh-low-frequency-intelligent-sounder-base-white","title":"Fire-Lite B200SR-LF-WH Low Frequency Intelligent Sounder Base, White","description":"\u003ch4 class=\"product-title-description\"\u003eFire-Lite  Low Frequency Intelligent, Programmable Sounder Base\u003c\/h4\u003e\n\u003cp\u003eThe B200SR-LF-WH and B200SR-LF-IV sounder bases are used with addressable detector heads. Refer to the appropriate manual for more information on sensors. The B200SR-LF-WH\/B200SR-LF-IV low frequency sounder base generates a low frequency tone around 520 Hz. Studies have shown that low frequency audible devices that operate around 520 Hz are more effective in waking individuals in sleeping areas. It offers maximum flexibility in configuration and operation to meet or exceed the requirements of UL268 and UL464.\u003c\/p\u003e\n\u003cp\u003eThe sounder base is capable of producing either the distinctive three-pulse temporal pattern (ANSI Temporal 3) fire alarm signal now required by NFPA 72 for commercial and residential applications. It can also produce a continuous tone by simply removing the included jumper from the device. Additionally, the B200SR-LF-WH\/B200SR-LF-IV is designed to be compatible with existing installations of B501-Series sounder bases.\u003c\/p\u003e\n\u003cp\u003eThe programmable sounder base in white is intended for use with intelligent systems. The sounder base requires an external 24 VDC power supply. The connections for the external power supply and the communication loop are isolated to prevent electrical interaction between them. Refer to the panel manual for maximum allowable number of units per loop.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBase Diameter: 6.875\" (17.46 cm)\u003c\/li\u003e\n\u003cli\u003eBase Height (less sensor): 2.0\" (5.08 cm)\u003c\/li\u003e\n\u003cli\u003eExternal Supply Voltage: 16 to 33 VDC (VFWR)\u003c\/li\u003e\n\u003cli\u003eStandby Current: 1 mA maximum VDC\u003c\/li\u003e\n\u003cli\u003eSLC Operating Voltage: 15 to 32 VDC\u003c\/li\u003e\n\u003cli\u003eSound Output: Greater than 85 dBA minimum measured in a UL reverberant room at 10 feet, 24 Volts (in continuous tone)\u003c\/li\u003e\n\u003cli\u003eThe detector used with this base must be tested and maintained regularly following NFPA 72 requirements.\u003c\/li\u003e\n\u003cli\u003eThe detector should be cleaned at least once a year.\u003c\/li\u003e\n\u003cli\u003eAvailable in white and Ivory \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/fire-lite-b200sr-lf-programmable-sounder-base-ivory\/\" rel=\"noopener\" target=\"_blank\"\u003eB200SR-LF-IV \u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246970175553,"sku":"FL-B200SRLFW","price":127.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/64804cc7-31krlgaafvl.jpg?v=1775081062"},{"product_id":"fire-lite-b224rb-relay-base","title":"Fire-Lite B224RB Relay Base","description":"\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eTo meet local code and application requirements, System Sensor offers standard 4\" and 6\" bases, as well as, specialty base designs including relay, isolator, sounder and low frequency sounder options for Select Series detectors.The standard 4\" and 6\" bases offer a plug-in detector base intended for use in intelligent systems, with screw terminals provided for power (+ and -), and remote annunciator connections. Communication takes place over the power (+ and -) lines. The 4\" base offers a compact design while the 6\" base provides compatibility with a wider range of junction boxes.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe Select Series specialty bases support application driven requirements. The bases employ a separate mounting plate that installs on various junction box sizes to eliminate unsightly surface-mount boxes. The mounting plate enables pre-wiring of all connections to speed and simplify installation. Relay bases (B224RB-WH\/B224RB-IV) provide one form C contact relay for control of auxiliary functions, such as door closure and elevator recall. The relay can operate in two different modes (short and long delay). The activation time for the short delay is 60 ms to 100 ms, while the activation time for the long delay is 6 sec to 10 sec. A shunt with pin headers, located on the base PC board, is used to set the delay timing. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eIsolator bases (B224BI-WH\/B224BI-IV) allow the Signaling Line Circuit (SLC) loop to operate under fault conditions created from a short circuit preventing an entire communication loop from being disabled. The base isolates the section of the loop containing the short circuit from the remainder of the circuit and automatically restores when the fault is corrected. The Select Series sounder and low frequency sounder bases are designed for new and existing dwelling unit applications. They offer maximum flexibility in installation, configuration, and operation to meet or exceed UL 268 and UL 464 requirements. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe Select Series low frequency sounder bases are designed to meet the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +\/- 10% with a square wave or its equivalent. Studies show that a lower frequency, centered around 520 Hz, is the most ideal to wake sleeping occupants, even those with mild to severe hearing loss. The B200SR sounder and LF sounder bases (B200SR-WH\/B200SR-IV\/B200SR-LF-WH\/B200SR-LF-IV) are fully compatible with existing B501BH-Series sounder base installations. The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe B200S sounder and LF sounder bases (B200S-WH\/B200S-IV\/B200S-LF-WH\/B200S-LF-IV) adopt the same address as the detector, but use a unique device type on the loop. The Fire Alarm Control Panel (FACP) can use that address to command an individual sounder - or a group of sounders - to activate. The command set from the FACP can be tailored to multiple event-driven tone outputs allowing selection of volume (75 or 85 dBA), tone (ANSI Temporal 3, ANSI Temporal 4 or March Time) and group. In addition, some FACPs will enable custom tone patterns. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe B200S series sounder bases recognize the System Sensor synchronization protocol. This enables it to be used as a component of the general evacuation signal - along with other System Sensor AV appliances - when connected to a power supply or FACP output capable of generating the System Sensor synchronization pulses.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv id=\"pdp-overview-details\" aria-hidden=\"false\" class=\"sc-bczRLJ hiOsDu\"\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003e\u003c\/h3\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ ibJhda\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eMechanical locking feature restricts removal of attached sensor head\u003c\/li\u003e\n\u003cli\u003eMultiple base formats meet application requirements\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Fire and Safety Plus","offers":[{"title":"Default Title","offer_id":43246970273857,"sku":"FL-B224RBWH","price":68.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/6600ebc6-41gecdtr1rl.jpg?v=1770772089"},{"product_id":"fire-lite-b300-6-6-base-standard-flanged-low-profile-mounting-base-white-replacement-for-b210lp","title":"Fire-Lite B300-6 6\" Base, Standard Flanged Low-Profile Mounting Base, White (Replacement for B210LP)","description":"\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eTo meet local code and application requirements, System Sensor offers standard 4\" and 6\" bases, as well as, specialty base designs including relay, isolator, sounder and low frequency sounder options for Select Series detectors.The standard 4\" and 6\" bases offer a plug-in detector base intended for use in intelligent systems, with screw terminals provided for power (+ and -), and remote annunciator connections. Communication takes place over the power (+ and -) lines. The 4\" base offers a compact design while the 6\" base provides compatibility with a wider range of junction boxes.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe Select Series specialty bases support application driven requirements. The bases employ a separate mounting plate that installs on various junction box sizes to eliminate unsightly surface-mount boxes. The mounting plate enables pre-wiring of all connections to speed and simplify installation.Relay bases (B224RB-WH\/B224RB-IV) provide one form C contact relay for control of auxiliary functions, such as door closure and elevator recall. The relay can operate in two different modes (short and long delay). The activation time for the short delay is 60 ms to 100 ms, while the activation time for the long delay is 6 sec to 10 sec. A shunt with pin headers, located on the base PC board, is used to set the delay timing. Isolator bases (B224BI-WH\/B224BI-IV) allow the Signaling Line Circuit (SLC) loop to operate under fault conditions created from a short circuit preventing an entire communication loop from being disabled. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe base isolates the section of the loop containing the short circuit from the remainder of the circuit and automatically restores when the fault is corrected.The Select Series sounder and low frequency sounder basesare designed for new and existing dwelling unit applications. They offer maximum flexibility in installation, configuration, and operation to meet or exceed UL 268 and UL 464 requirements. The Select Series low frequency sounder bases are designed to meet the NFPA 72 sleeping space requirement to produce a fundamental frequency of 520 Hz +\/- 10% with a square wave or its equivalent. Studies show that a lower frequency, centered around 520 Hz, is the most ideal to wake sleeping occupants, even those with mild to severe hearing loss.The B200SR sounder and LF sounder bases (B200SR-WH\/B200SR-IV\/B200SR-LF-WH\/B200SR-LF-IV) are fully compatible with existing B501BH-Series sounder base installations.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003e The device enables users to select one of two B501-supported tones (ANSI Temporal 3 or Continuous) through a jumper.The B200S sounder and LF sounder bases (B200S-WH\/B200S-IV\/B200S-LF-WH\/B200S-LF-IV) adopt the same address as the detector, but use a unique device type on the loop. The Fire Alarm Control Panel (FACP) can use that address to command an individual sounder - or a group of sounders - to activate. The command set from the FACP can be tailored to multiple event-driven tone outputs allowing selection of volume (75 or 85 dBA), tone (ANSI Temporal 3, ANSI Temporal 4 or March Time) and group. In addition, some FACPs will enable custom tone patterns. The B200S series sounder bases recognize the System Sensor synchronization protocol. This enables it to be used as a component of the general evacuation signal - along with other System Sensor AV appliances - when connected to a power supply or FACP output capable of generating the System Sensor synchronization pulses.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv id=\"pdp-overview-details\" aria-hidden=\"false\" class=\"sc-bczRLJ hiOsDu\"\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003e\u003c\/h3\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ ibJhda\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eSEMS screws provide easyWiring connection\u003c\/li\u003e\n\u003cli\u003eSupport for 12-24 AWG provides installation flexibility\u003c\/li\u003e\n\u003cli\u003eMultiple base formats meet application requirements\u003c\/li\u003e\n\u003cli\u003eStandard white color with ivory and black options\u003c\/li\u003e\n\u003cli\u003eUL 268 compliant\u003c\/li\u003e\n\u003cli\u003eMechanical locking feature restricts removal of attached sensor head\u003c\/li\u003e\n\u003cli\u003ePre-wired mounting plate simplifies installation\u003c\/li\u003e\n\u003cli\u003eApplication driven feature sets\u003c\/li\u003e\n\u003cli\u003eSounder bases both UL 268 and UL 464 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246970142785,"sku":"FL-B3006","price":27.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/4ec4302f-fl-b3006bp_lg-1.jpg?v=1775081119"},{"product_id":"fire-lite-b200s-intelligent-addressable-sounder-base","title":"Fire-Lite B200S-WH","description":"\u003ch4\u003eFire-Lite B200S Intelligent Addressable Sounder Base,\u003c\/h4\u003e\n\u003cp\u003eThe B200S sounder and -LF sounder bases (B200S-WH\/B200S-IV\/ B200S-LF-WH\/B200S-LF-IV) adopt the same address as the detector, but use a unique device type on the loop. The Fire Alarm Control Panel (FACP) can use that address to command an individual sounder — or a group of sounders — to activate.\u003c\/p\u003e\n\u003cp\u003eTailor the command set from the FACP to multiple event-driven tone outputs allowing selection of volume (75 or 85 dBA), tone (ANSI Temporal 3, ANSI Temporal 4, or March Time) and group. In addition, some FACPs will enable custom tone patterns. The B200S series sounder bases recognize the System Sensor synchronization protocol. This enables them to be used as a component of the general evacuation signal — along with other System Sensor AV appliances — when connected to a power supply or FACP output capable of generating the System Sensor synchronization pulses.\u003c\/p\u003e\n\u003ch4\u003eAddressable Sounder Base Main Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003e SEMS screws provide easy wiring connection\u003c\/li\u003e\n\u003cli\u003e Support for 12-24 AWG provides installation flexibility\u003c\/li\u003e\n\u003cli\u003e Multiple base formats meet application requirements\u003c\/li\u003e\n\u003cli\u003e Standard white color with ivory and black options\u003c\/li\u003e\n\u003cli\u003e UL 268 compliant\u003c\/li\u003e\n\u003cli\u003e Mechanical locking feature restricts removal of attached sensor head\u003c\/li\u003e\n\u003cli\u003ePre-wired mounting plate simplifies installation\u003c\/li\u003e\n\u003cli\u003eAvailable in White and Ivory\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fire and Safety Plus","offers":[{"title":"Default Title","offer_id":43246971519041,"sku":"FL-B200SWH","price":86.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/FL-B200SWH.jpg?v=1774645464"},{"product_id":"silent-knight-sd505-6rb-6-relay-base-for-use-with-addressable-sensors","title":"Silent Knight SD505-6RB 6\" Relay Base, For Use With Addressable Sensors","description":"\u003cp\u003eThe SD505-6RB adds a relay output function to an addressable detector. Providing one Form C contact rated at 8.0 amps for 240 VAC, 120 VAC and 30 VDC. The SD500-6RB allows you to control a wide variety of normally open and normally closed applications, including elevator recall, door closing, fan operation, and auxiliary notification. And, because the relay module is addressable, these applications can be located at any point in the signaling line circuit.\u003c\/p\u003e\n\u003cp\u003eThe SD500-6RB is compact and mounts in an extension base that is compatible with the SD505-APS, SD505-AIS, or SD505-AHS. Combine this with the features you've come to expect from Silent Knight fire protection devices-easy installation and stable operation-and it adds up to a flexible solution for all your fire protection needs.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdds an 8.0 A relay output to an an addressable detector\u003c\/li\u003e\n\u003cli\u003e Fully supervised\u003c\/li\u003e\n\u003cli\u003e Can be used with either style 4 or style 6 supervision.\u003c\/li\u003e\n\u003cli\u003eMounts to a standard single or double gang electrical box.\u003c\/li\u003e\n\u003cli\u003eUL Listed\u003c\/li\u003e\n\u003cli\u003e Adds relay output without using another SLC addresses\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Silent Knight","offers":[{"title":"Default Title","offer_id":43246972174401,"sku":"SK-SD5056RB","price":279.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/42c6c010-1060132582_lg.jpg?v=1770769528"},{"product_id":"fire-lite-b200sr-wh-intelligent-sounder-base-with-ansi-temporal-or-continuous-tone-intended-for-retrofit-applications-white","title":"Fire-Lite B200SR-WH Intelligent Sounder Base with ANSI Temporal or Continuous Tone, Intended for Retrofit Applications, White","description":"\u003cp\u003eFire-Lite B200SR-WH Intelligent Sounder Base with ANSI Temporal 3 or Continuous Tone, Intended for Retrofit Applications, White\u003c\/p\u003e\n\n\u003cp\u003eWhite, Intelligent sounder base capable of producing sound output with ANSI Temporal 3 or continuous tone. Intended for retrofit applications.\u003c\/p\u003e\n\n\u003cp\u003eThe B200SR-WH and B200SR-IV sounder bases are used with addressable detector heads. Refer to the appropriate manual for more information on sensors.\u003c\/p\u003e\n\n\u003cp\u003eThe B200SR-WH and B200SR-IV sounder bases were designed specifically to meet the needs of dwelling unit applications. It offers maximum flexibility in configuration and operation to meet or exceed the requirements of UL268 and UL464.\u003c\/p\u003e\n\n\u003cp\u003eThe sounder base is capable of producing either the distinctive three-pulse temporal pattern (ANSI Temporal 3) fire alarm signal now required by NFPA 72 for commercial and residential applications or a continuous tone by simply removing the included jumper from the device.\u003c\/p\u003e\n\n\u003cp\u003eAdditionally, the B200SR-WH\/B200SR-IV is designed to be compatible with existing installations of B501-Series sounder bases. The sounder base is intended for use with intelligent systems. The sounder base requires an external 24 VDC power supply. The connections for the external power supply and the communication loop are isolated to prevent electrical interaction between them. Refer to the panel manual for maximum allowable number of units per loop.\u003c\/p\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246973124673,"sku":"FL-B200SRWH","price":91.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/72f8de7b-fl-b200srwh_lg.jpg?v=1770772089"},{"product_id":"fire-lite-b501-bl-4-standard-european-flangeless-mounting-base-ul-ulc-listed-black","title":"Fire-Lite B501-BL 4\" Standard European Flangeless Mounting Base, UL\/ULC Listed, Black","description":"\u003cp\u003eTo meet local code and application requirements, Fire-Lite offers standard 4\" and 6\" bases, as well as, specialty base designs including relay, isolator, sounder and low frequency sounder options for the new 365 Series of addressable detectors as well as previous generations\u003c\/p\u003e\n\n\u003cp\u003eThe standard 4\" and 6\" bases offer a plug-in detector base intended for use in intelligent systems, with screw terminals provided for power (+ and -), and remote annunciator connections. Communication takes place over the power (+ and -) lines. The 4\" base offers a compact design while the 6\" base provides compatibility with a wider range of junction boxes.\u003c\/p\u003e\n\n\u003cp\u003eThe specialty bases support application driven requirements. These bases employ a separate mounting plate that installs on various junction box sizes to eliminate unsightly surface-mount boxes. The mounting plate enables pre-wiring of all connections to speed and simplify installation.\u003c\/p\u003e\n\n\u003cp\u003eRelay bases (B224RB-WH\/B224RB-IV) provide one form-C contact relay for control of auxiliary functions, such as door closure and elevator recall. The relay can operate in two different modes (short and long delay). The activation time for the short delay is 60-100 milliseconds, while the activation time for the long delay is 6-10 seconds. A shunt with pin headers, located on the base PC board, is used to set the delay timing.\u003c\/p\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246973714497,"sku":"FL-B501BL","price":30.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/21e5a5c4-fl-b501bl_lg.jpg?v=1770770289"},{"product_id":"fire-lite-b501-iv-4-standard-european-flangeless-mounting-base-ul-ulc-listed-ivory","title":"Fire-Lite B501-IV 4\" Standard European Flangeless Mounting Base, UL\/ULC Listed, Ivory","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003eThe B501-IV is an Ivory color, 4” standard European flangeless mounting base. UL\/ULC listed. \u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003ch3 class=\"sc-bczRLJ iwaCMW\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003eMain Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eMultiple base formats meet application requirements\u003c\/li\u003e\n\u003cli\u003eSEMS screws provide easy wiring connection\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 15 to 32 VDC\u003c\/li\u003e\n\u003cli\u003eStandby current: 170 µA maximum\u003c\/li\u003e\n\u003cli\u003eUL 268 compliant\u003c\/li\u003e\n\u003cli\u003eMechanical locking feature restricts removal of attached sensor head\u003c\/li\u003e\n\u003cli\u003ealso available in white \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/fire-lite-b501-white-4-flangeless-mounting-base\/\" rel=\"noopener\" target=\"_blank\"\u003eb501\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246973812801,"sku":"FL-B501IV","price":31.3,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/e0b289bb-fl-b501iv_lg.jpg?v=1773118808"},{"product_id":"system-sensor-wav-cwl-swift-ceiling-mount-av-base-for-l-series-av-devices-white","title":"System Sensor WAV-CWL SWIFT Ceiling Mount AV Base for L-Series AV Devices, White","description":"\u003cp\u003eThe System Sensor SWIFT® Wireless system offers an AV base to support L-Series devices in wireless installations. The SWIFT AV bases (WAV-CRL and WAV-CWL) are intended for use with compatible System Sensor L-Series AV notification appliances to meet a comprehensive range of notification requirements. The AV Base provides power for the audio and visual signals and supports wireless communication with the Fire Alarm Control Panel (FACP).\u003c\/p\u003e\n\u003cp\u003eThe L-Series AV notification appliance is mounted directly to the wireless AV base allowing flexibility in color, placement and signal output. Power is supplied through two sets of 4 batteries - one set provides power for wireless communication, and the other set provides power for the notification appliance's audio and\/or visual signal. Battery life of the wireless portion is UL listed for at least 2 years. Battery life for the AV set of batteries depends upon the activation time and output level of the audio or visual signal.\u003c\/p\u003e\n\u003cp\u003eThe SWIFT synchronization module (W-SYNC) can be used to provide audio and visual synchronization between SWIFT notification appliances and System Sensor wired notification appliances. The wireless synchronization module operates from 24V power with supplemental battery support and communicates through the mesh network to the gateway and FACP. Synchronization is only available with notification appliances that use the System Sensor synchronization protocol. Synchronization of the SWIFT notification appliances within a single mesh network is inherent in the wireless system and a wireless synchronization module is not needed. The W-SYNC also provides wireless control and monitoring of a Notification Appliance Circuit (NAC) expander or power supply.\u003c\/p\u003e\n\u003cdiv class=\"row headernametop hrnone\"\u003e\n\u003ch4 class=\"item-header\"\u003e\u003cstrong\u003eMain Features \u003c\/strong\u003e\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cul\u003e\n\u003cli\u003eWireless installation\u003c\/li\u003e\n\u003cli\u003eClass A mesh network\u003c\/li\u003e\n\u003cli\u003eAddressable code wheels\u003c\/li\u003e\n\u003cli\u003eCommercial applications\u003c\/li\u003e\n\u003cli\u003eListed to UL 464, UL 1638, UL 1971, ULC S525, and ULC S526\u003c\/li\u003e\n\u003cli\u003eFrequency hopping\u003c\/li\u003e\n\u003cli\u003eBi-Directional Communications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":43246974730305,"sku":"BK-WAVCWL","price":289.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/a70fbb87-bk-wavcwl_lg.jpg?v=1773109889"},{"product_id":"system-sensor-wav-crl-swift-ceiling-mount-av-base-for-l-series-av-devices-red","title":"System Sensor WAV-CRL SWIFT Ceiling Mount AV Base for L-Series AV Devices, Red","description":"\u003cp\u003eThe System Sensor SWIFT® Wireless system offers an AV base to support L-Series devices in wireless installations. The SWIFT AV bases (WAV-CRL and WAV-CWL) are intended for use with compatible System Sensor L-Series AV notification appliances to meet a comprehensive range of notification requirements. The AV Base provides power for the audio and visual signals and supports wireless communication with the Fire Alarm Control Panel (FACP).\u003c\/p\u003e\n\u003cp\u003eThe L-Series AV notification appliance is mounted directly to the wireless AV base allowing flexibility in color, placement and signal output. Power is supplied through two sets of 4 batteries - one set provides power for wireless communication, and the other set provides power for the notification appliance's audio and\/or visual signal.\u003c\/p\u003e\n\u003cp\u003eBattery life of the wireless portion is UL listed for at least 2 years. Battery life for the AV set of batteries depends upon the activation time and output level of the audio or visual signal. The SWIFT synchronization module (W-SYNC) can be used to provide audio and visual synchronization between SWIFT notification appliances and System Sensor wired notification appliances. The wireless synchronization module operates from 24V power with supplemental battery support and communicates through the mesh network to the gateway and FACP.\u003c\/p\u003e\n\u003cp\u003eSynchronization is only available with notification appliances that use the System Sensor synchronization protocol. Synchronization of the SWIFT notification appliances within a single mesh network is inherent in the wireless system and a wireless synchronization module is not needed. The W-SYNC also provides wireless control and monitoring of a Notification Appliance Circuit (NAC) expander or power supply.\u003c\/p\u003e\n\u003cdiv class=\"row headernametop hrnone\"\u003e\n\u003ch4 class=\"item-header\"\u003eMain Features\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cul\u003e\n\u003cli\u003eWireless installation\u003c\/li\u003e\n\u003cli\u003eClass A mesh network\u003c\/li\u003e\n\u003cli\u003eAddressable code wheels\u003c\/li\u003e\n\u003cli\u003eCommercial applications\u003c\/li\u003e\n\u003cli\u003eListed to UL 464, UL 1638, UL 1971, ULC S525, and ULC S526\u003c\/li\u003e\n\u003cli\u003eFrequency hopping\u003c\/li\u003e\n\u003cli\u003eBi-Directional Communications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":43246975123521,"sku":"BK-WAVCRL","price":284.87,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/067feeed-bk-wavcrl_lg.jpg?v=1770950690"},{"product_id":"system-sensor-b114lpa-smoke-detector-base","title":"System Sensor B114lpa Smoke Detector Base","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\n\u003cp class=\"ai-optimize-29 ai-optimize-introduction\"\u003eThe model B114LP detector base is designed for use with System Sensor model 2151 photoelectronic and 1151 ionization detector heads. This four-wire base is equipped with screw terminals for the connection of power, ground, relay connections, and an optional RA400Z\/RA100Z remote annunciator. It also includes a resistor that limits current when the associated smoke detector is in the alarm state.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText ai-optimize-30\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n  \u003cli class=\"ai-optimize-31\"\u003eLow standby current\u003c\/li\u003e\n  \u003cli class=\"ai-optimize-32\"\u003eTwo LEDs blink in standby\u003c\/li\u003e\n  \u003cli class=\"ai-optimize-33\"\u003eLow-profile smoke detector design\u003c\/li\u003e\n  \u003cli class=\"ai-optimize-34\"\u003eAccepts 24 or 120V supply voltage\u003c\/li\u003e\n  \u003cli class=\"ai-optimize-35\"\u003eDetector head plugs easily into base\u003c\/li\u003e\n  \u003cli class=\"ai-optimize-36\"\u003eDesigned for mounting on a standard electrical box\u003c\/li\u003e\n  \u003cli class=\"ai-optimize-37\"\u003eRemovable cover and insect screen for field cleaning\u003c\/li\u003e\n  \u003cli class=\"ai-optimize-38\"\u003eField sensitivity metering of detector to meet the requirements of NFPA 72 with the use of SENS-RDR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":43246975156289,"sku":"BK-B114LP","price":180.13,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/f03b8647-bk-b114lp_lg.jpg?v=1770769416"},{"product_id":"system-sensor-b114lpbt-24vac-dc-detector-base-for-use-with-2151-special-applications-duct-smoke-detector","title":"System Sensor B114LPBT 24VAC\/DC detector base for use with 2151 Special Applications Duct Smoke Detector","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003eThe B114LPBT detector base is designed for use with System Sensor model 2151 photoelectronic and 1151 ionization detector heads. The capability of plugging these detectors into a variety of special bases makes them more versatile than equivalent direct-wired models. Refer to the System Sensor catalog for other available plug-in bases. The B114LPBT base is intended for use in 4-wire systems with terminals provided for remote annunciator and relay connections.\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003e\u003c\/h3\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eLow-profile smoke detector design\u003c\/li\u003e\n\u003cli\u003eLow standby current\u003c\/li\u003e\n\u003cli\u003eTwo LEDs blink in standby\u003c\/li\u003e\n\u003cli\u003eDetector head plugs easily into base\u003c\/li\u003e\n\u003cli\u003eField sensitivity metering of detector to meet the requirements of NFPA 72 with the use of SENS-RDR\u003c\/li\u003e\n\u003cli\u003eDesigned for mounting on a standard electrical box\u003c\/li\u003e\n\u003cli\u003eRemovable cover and insect screen for field cleaning\u003c\/li\u003e\n\u003cli\u003eAccepts 24 or 120V supply voltage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":43246975254593,"sku":"BK-B114LPBT","price":117.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/5b876f1b-1019121898_lg.jpg?v=1770769432"},{"product_id":"system-sensor-smb600-flanged-surface-mounting-kit-for-ceiling-mount-for-smoke-detector","title":"System Sensor SMB600 Flanged Surface Mounting Kit for Ceiling Mount For Smoke Detector","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\n\u003cp class=\"ai-optimize-29\"\u003eThe SMB600 Surface Mounting Kit allows System Sensor detectors to be surface mounted when the junction box intended to be used is not of adequate size.\u003c\/p\u003e\n\u003ch3 class=\"ai-optimize-29\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003eMain Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli class=\"ai-optimize-31\"\u003eCeiling Mount offers a reliable, convenient mounting solution\u003c\/li\u003e\n\u003cli class=\"ai-optimize-32\"\u003eBuilt with plastic product material to offer great versatility and allow creativity and innovation in design and construction\u003c\/li\u003e\n\u003cli class=\"ai-optimize-33\"\u003eBuilt with plastic product material to offer high strength and durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"System Sensor","offers":[{"title":"Default Title","offer_id":43246975320129,"sku":"BK-SMB600","price":27.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/e7658b52-bk-smb600_lg.jpg?v=1770768241"},{"product_id":"kidde-ki-rb-ki-series-detector-mounting-base-with-relay","title":"Kidde KI-RB KI Series Detector Mounting Base with Relay","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003eThis base includes a relay. Normally Open or Normally Closed operation is selected during installation. The dry contact is rated for 1 amp (pilot duty) @ 30 Vdc. The relay's position is supervised to avoid accidentally jarring it out of position. The KI-RB can be operated as a control relay if programmed to do so at the control panel. The relay base does not support the GSA-LED Remote LED.\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch3 class=\"sc-bczRLJ iwaCMW\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003eMain Features\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eIncludes relay with Normally Open\/Closed operation\u003c\/li\u003e\n\u003cli\u003eDry contact rated for 1 amp @ 30 Vdc\u003c\/li\u003e\n\u003cli\u003eSupervised relay position to prevent dislocation\u003c\/li\u003e\n\u003cli\u003eCan operate as control relay via control panel\u003c\/li\u003e\n\u003cli\u003eDoes not support GSA-LED Remote LED\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/kidde-kir-hcd-intelligent-multisensor-heat-and-co-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eKIR-HCD Heat and CO Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43246978957377,"sku":"ED-KIRB","price":49.81,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/865628c7-ed-kirb_lg.jpg?v=1773118861"},{"product_id":"kidde-ki-rb4-ki-series-4-detector-mounting-base-with-relay-and-trim-skirt","title":"Kidde KI-RB4 KI Series 4\" Detector Mounting Base with Relay and Trim Skirt","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003eThis base includes a relay. Normally Open or Normally Closed operation is selected during installation. The dry contact is rated for 1 amp (pilot duty) @30 Vdc. The relay’s position is supervised to avoid accidentally jarring it out of position. The KI-RB can be operated as a control relay if programmed to do so at the control panel. The relay base does not support the GSA-LED Remote LED.\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003eMain Features\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003e4\" Detector Mounting Base with Relay\u003c\/li\u003e\n\u003cli\u003eSelectable Normally Open\/Closed Operation\u003c\/li\u003e\n\u003cli\u003e1 Amp Dry Contact Rated @30 Vdc\u003c\/li\u003e\n\u003cli\u003eSupervised Relay Position\u003c\/li\u003e\n\u003cli\u003eControl Relay Functionality\u003c\/li\u003e\n\u003cli\u003eDoes Not Support GSA-LED Remote LED\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/kidde-kir-hcd-intelligent-multisensor-heat-and-co-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eKIR-HCD Heat and CO Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43246980759617,"sku":"ED-KIRB4","price":49.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/82ccbd81-ed-kirb4_lg.jpg?v=1770769426"},{"product_id":"potter-pad100-6db-addressable-detector-base-6","title":"Potter PAD100-6DB Addressable Detector Base, 6\"","description":"\u003cdiv class=\"sc-bczRLJ jMeay\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eThe Potter PAD100-6DB and \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-pad100-4db-4-in-addressable-detector-base\/\" rel=\"noopener\" target=\"_blank\"\u003ePAD100-4DB\u003c\/a\u003e detector bases are used to install Potter's addressable smoke and heat detectors. The PAD100-6DB will mount on a single gang, double gang, octagon or 4\" square electrical box.\u003c\/span\u003e\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\"\u003e\u003c\/h3\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl gKJdoF titleText\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eTerminals marked with polarity to assist with installation\u003c\/li\u003e\n\u003cli\u003eDuplicate terminals for in and out SLC Wiring\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12AWG wire sizes\u003c\/li\u003e\n\u003cli\u003eInstalls on single gang, double gang, octagon or 4\" square box\u003c\/li\u003e\n\u003cli\u003eLocking tab prevents unauthorized detector removal\u003c\/li\u003e\n\u003cli\u003ePAD100 detectors 6 base\u003c\/li\u003e\n\u003cli\u003eMultiple mounting options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43246985543745,"sku":"PL-PAD1006B","price":25.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/8b1fc168-pl-pad1006b_lg.jpg?v=1770767840"},{"product_id":"potter-pad100-lfsb-addressable-low-frequency-sounder-base","title":"Potter PAD100-LFSB Addressable Low Frequency Sounder Base","description":"\u003cdiv class=\"sc-bczRLJ blswqV\"\u003eThe Addressable Low Frequency Sounder Base (PAD100-LFSB) is a sounder base that may be utilized in a variety of applications. The base has a locking feature for the sensor that may be used or removed in the field. Once the head is removed, the sounder is accessible in the bottom of the unit. The base has an independent sounder module that may be programmed as a single station, zone or all call sounder.\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003eThe PAD100-LFSB passes through the sound pattern sent to the sounder, therefore it may reproduce in any pattern the power supply provides. The PAD100-LFSB does not consume an address on the loop and is fully programmable to operate with any input. Once activated the sounder will also follow the input from the power source and deactivate accordingly.\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\" data-test-selector=\"OverviewTitle\"\u003e\u003c\/h3\u003e\n\u003ch3 class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ ibJhda\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eTerminals accept 18 to 12 AWG Wire sizes\u003c\/li\u003e\n\u003cli\u003eSupports Class A, Class X and Class B Wiring\u003c\/li\u003e\n\u003cli\u003eMay be mapped to any device connected to the control panel\u003c\/li\u003e\n\u003cli\u003eDoes not require SLC Loop address, uses PAD sub point addressing feature\u003c\/li\u003e\n\u003cli\u003eAddressable low frequency sounder base, allows for single station, grouped or all call activation\u003c\/li\u003e\n\u003cli\u003eComplies with the Low Frequency Signal Requirements per NFPA 72 and UL 464 for Audible Signaling Devices\u003c\/li\u003e\n\u003cli\u003eCompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-afc-50-addressable-releasing-fire-alarm-control-panel\/\" rel=\"noopener\" target=\"_blank\"\u003eAFC-50 Fire Alarm Control Panel\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43246988787777,"sku":"PL-PAD100LFS","price":165.05,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/3282730a-pl-pad100lfs_lg.jpg?v=1773110128"},{"product_id":"potter-sb-46-46ma-draw-at-24vdc-smoke-detector-base","title":"Potter SB-46  46mA Draw at 24VDC Smoke Detector Base","description":"\u003cdiv class=\"sc-bczRLJ blswqV\"\u003eThe SB Series is a 6\" polarized base with annunciator output featuring a current limiting resistor, and a blocking diode to enhance annunciator function. The SB Series Smoke Detector base is designed specifically for use with the Potter Smoke Detector Models IS-24, PS-24 and PS-24H. These detectors will not sense fires which start where smoke does not reach the detector.\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003eFires on other building levels, within walls, on roofs , in chimneys, or on the other side of closed doors may not be detected. Fires from explosions, improperly stored flammable liquids, escaping gas, arson or fires resulting from inadequate fire protection practices may not be detected. Smoke detectors should be tested upon completion of installation and at least semi-annually thereafter, in accordance with the section of \"Inspections, Tests, and Maintenance\" in NFPA-72. To Install the Detector: Insert the detector into the base, turn the detector clockwise until it locks, then tighten the vandal resistant allen screw \u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan style=\"font-family: Lora, sans-serif; font-size: 24px;\"\u003eMain Features\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"sc-bczRLJ ibJhda\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003e46mA draw at 24V DC\u003c\/li\u003e\n\u003cli\u003ePolarized smoke detector base\u003c\/li\u003e\n\u003cli\u003eCurrent limiting resistor\u003c\/li\u003e\n\u003cli\u003eBlocking diode\u003c\/li\u003e\n\u003cli\u003eDesigned for the IS-24, \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-cps-24-conventional-photoelectric-smoke-detector\/\" rel=\"noopener\" target=\"_blank\"\u003ePS-24\u003c\/a\u003e and PS-24H smoke detectors\u003c\/li\u003e\n\u003cli\u003eCompatible with all Potter release panels (except 3000, 5000 and 9000 panels)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43246989049921,"sku":"PL-SB46","price":28.24,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/a5166843-pl-sb46_lg.jpg?v=1773116498"},{"product_id":"potter-pad100-sb-addressable-sounder-base","title":"Potter PAD100-SB Addressable Sounder Base","description":"\u003cdiv\u003eThe Addressable Sounder Base 6\" (PAD100-SB) is a sounder base that may be utilized in a variety of applications. The base has a locking feature for the sensor that may be used or removed in the field. Once the head is removed, the sounder is accessible in the bottom of the unit.\n\u003ch4 class=\"item-header\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 class=\"item-header\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eIntegrated Sounder in base\u003c\/li\u003e\n\u003cli\u003e75 dB (UL 464 Listed) sounder output\u003c\/li\u003e\n\u003cli\u003eSounder independent of sensor, allows for a single station,\u003c\/li\u003e\n\u003cli\u003egrouped or all-call\u003c\/li\u003e\n\u003cli\u003eMay be mapped to any device connected to the control panel\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12 AWG wire sizes\u003c\/li\u003e\n\u003cli\u003eSupports Class A, Class X and Class B wiring\u003c\/li\u003e\n\u003cli\u003eDoes not require SLC Loop address\u003c\/li\u003e\n\u003cli\u003eUUKL Listed for Smoke Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43246990032961,"sku":"PL-PAD100SB","price":100.43,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/2f587126-pl-pad100sb_lg.jpg?v=1773109990"},{"product_id":"potter-pad100-rb-addressable-relay-base","title":"Potter PAD100-RB Addressable Relay Base","description":"\u003cdiv\u003eThe Addressable Relay Base 6\" (PAD100-RB) is combination sensor base with a relay module included. The base has a locking feature for the sensor that may be used or removed in the field. Once the head is removed, the relay is accessible in the bottom of the unit. The PAD100-RB provides one form C relay output.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe relay is rated for 2A @ 30 VDC, and 0.5A at 125VAC. The PAD100-RB provides for separation of high voltage and non-power limited connections from the power limited Signaling Line Circuit (SLC). The PAD100-RB does not consume an SLC address and does not require an auxiliary power source.\n\u003ch4 class=\"item-header\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 class=\"item-header\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eOne form C relay as part of the base assembly\u003c\/li\u003e\n\u003cli\u003eRelay rating: 2A @ 30VDC, 0.5A @ 125VAC\u003c\/li\u003e\n\u003cli\u003eWorks independent of the sensors attached\u003c\/li\u003e\n\u003cli\u003eMay be mapped to any device connected to the Control Panel\u003c\/li\u003e\n\u003cli\u003eLED to indicate that the unit is active\u003c\/li\u003e\n\u003cli\u003eSeparation included in the base for high and low voltage and\u003c\/li\u003e\n\u003cli\u003epower limited\/non-power limited connections\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12 AWG wire sizes\u003c\/li\u003e\n\u003cli\u003eSupports Class A, Class X and Class B wiring\u003c\/li\u003e\n\u003cli\u003eDoes not require SLC Loop address\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43246990590017,"sku":"PL-PAD100RB","price":97.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/1bcb4d41-pl-pad100rb_lg.jpg?v=1773115695"},{"product_id":"potter-pad100-4db-4-in-addressable-detector-base","title":"Potter PAD100-4DB 4 in. Addressable Detector Base","description":"\u003cdiv\u003eThe\u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-pad100-6db-addressable-detector-base-6\/\" target=\"_blank\" rel=\"noopener\"\u003e PAD100-6DB\u003c\/a\u003e and PAD100-4DB are low-profile, surface mount bases used with Potter's addressable detectors. The base uses screw clamp terminals that accept wire ranging from 22 to 14 AWG. When installed on recessed electrical boxes the PAD100-6DB is wide enough to completely cover the back box and the immediate surrounding area. The base is equipped with a locking tab to deter unauthorized removal of the attached detector.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4 class=\"item-header\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n  \u003cli\u003eTerminals Marked with Polarity to assist with installation\u003c\/li\u003e\n  \u003cli\u003eDuplicate terminals for in and out SLC wiring\u003c\/li\u003e\n  \u003cli\u003eTerminals accept 22 to 12 AWG wire sizes\u003c\/li\u003e\n  \u003cli\u003eInstalls on single gang, double gang, octagon or 4\" square box\u003c\/li\u003e\n  \u003cli\u003eLocking tab prevents unauthorized detector removal\u003c\/li\u003e\n  \u003cli\u003eProduct includes 5 year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43246991147073,"sku":"PL-PAD1004DB","price":21.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/ab441cf2-pl-pad1004db_lg.jpg?v=1773109933"},{"product_id":"potter-pad300-6db-6-detector-base-low-profile-surface-mount-white","title":"Potter PAD300-6DB 6\" Detector Base, Low profile, Surface-mount, White","description":"\u003cdiv id=\"pdp_productoverview\" class=\"rd-hyg-etl-wrapper\"\u003eThe PAD300-6DB and PAD300-4DB are low-profile, surface-mount bases used with Potter’s addressable detectors. The base uses screw clamp terminals that accept wire ranging from 22 to 12 AWG. When installed on recessed electrical boxes, the PAD300-6DB is wide enough to completely cover the back box and the immediate surrounding area. The base is equipped with a locking tab to deter unauthorized removal of the attached detector.\u003c\/div\u003e\n\u003cdiv class=\"row headername non-etl-overview\" style=\"box-sizing: border-box; outline: none !important; padding: 0px; width: auto; max-width: none; font-size: 16px; line-height: 1.63; font-family: 'Nunito Sans', sans-serif; color: #000000; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; white-space: normal; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; margin: 0px 0px 20px !important 0px;\"\u003e\n\u003ch4 class=\"item-header rd-hyg-item-header\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4 class=\"item-header rd-hyg-item-header\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv class=\"rd-feature-bullets-non-etl\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eTerminals marked with polarity to assist with installation\u003c\/li\u003e\n\u003cli\u003eDuplicate Terminals for In-and-out SLC Wiring\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12 AWG wire sizes\u003c\/li\u003e\n\u003cli\u003eInstalls on Single Gang, Double Gang, Octagon or 4” Square Box\u003c\/li\u003e\n\u003cli\u003eLocking tab prevents unauthorized detector removal\u003c\/li\u003e\n\u003cli\u003eProduct includes 5-year warranty\u003c\/li\u003e\n\u003cli\u003e6” mounting base comes with trim plate cover\u003c\/li\u003e\n\u003cli\u003ecompatible with: \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-pad300-hd-analog-heat-detector\/\" rel=\"noopener\" target=\"_blank\"\u003ePAD300-HD Analog Heat Detector\u003c\/a\u003e, \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-pad300-pcd-photoelectric-smoke-and-carbon-monoxide-detector-low-profile-wall-mount-white\/\" rel=\"noopener\" target=\"_blank\"\u003ePAD300-PCD Smoke and Carbon Monoxide Detector,\u003c\/a\u003e \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/potter-pad300-pd-analog-photoelectric-smoke-detector\/\" rel=\"noopener\" target=\"_blank\"\u003e PAD300-PD Smoke Detector\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43246995472449,"sku":"PL-PAD3006DB","price":20.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/3c5a5947-pl-pad3006db.jpg?v=1770764843"},{"product_id":"fire-lite-b200sr-lf-iv-low-frequency-intelligent-sounder-base-ivory","title":"Fire-Lite B200SR-LF-IV Low Frequency Intelligent Sounder Base, Ivory","description":"\u003ch4 class=\"product-title-description\"\u003eFire-Lite  Low Frequency Intelligent, Programmable Sounder Base\u003c\/h4\u003e\n\u003cp\u003eThe B200SR-LF-WH and B200SR-LF-IV sounder bases are used with addressable detector heads. Refer to the appropriate manual for more information on sensors. The B200SR-LF-WH\/B200SR-LF-IV low frequency sounder base generates a low frequency tone around 520 Hz. Studies have shown that low frequency audible devices that operate around 520 Hz are more effective in waking individuals in sleeping areas. It offers maximum flexibility in configuration and operation to meet or exceed the requirements of UL268 and UL464.\u003c\/p\u003e\n\u003cp\u003eThe sounder base is capable of producing either the distinctive three-pulse temporal pattern (ANSI Temporal 3) fire alarm signal now required by NFPA 72 for commercial and residential applications. It can also produce a continuous tone by simply removing the included jumper from the device. Additionally, the \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/fire-lite-b200sr-lf-wh-iv-programmable-sounder\/\" rel=\"noopener\" target=\"_blank\"\u003eB200SR-LF-WH\u003c\/a\u003e\/B200SR-LF-IV is designed to be compatible with existing installations of B501-Series sounder bases. The programmable sounder base in white is intended for use with intelligent systems. The sounder base requires an external 24 VDC power supply. The connections for the external power supply and the communication loop are isolated to prevent electrical interaction between them. Refer to the panel manual for maximum allowable number of units per loop.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBase Diameter: 6.875\" (17.46 cm)\u003c\/li\u003e\n\u003cli\u003eBase Height (less sensor): 2.0\" (5.08 cm)\u003c\/li\u003e\n\u003cli\u003eExternal Supply Voltage: 16 to 33 VDC (VFWR)\u003c\/li\u003e\n\u003cli\u003eStandby Current: 1 mA maximum VDC\u003c\/li\u003e\n\u003cli\u003eSLC Operating Voltage: 15 to 32 VDC\u003c\/li\u003e\n\u003cli\u003eSound Output: Greater than 85 dBA minimum measured in a UL reverberant room at 10 feet, 24 Volts (in continuous tone)\u003c\/li\u003e\n\u003cli\u003eThe detector used with this base must be tested and maintained regularly following NFPA 72 requirements.\u003c\/li\u003e\n\u003cli\u003eThe detector should be cleaned at least once a year.\u003c\/li\u003e\n\u003cli\u003eAvailable in white \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/fire-lite-b200sr-lf-wh-iv-programmable-sounder\/\" rel=\"noopener\" target=\"_blank\"\u003eB200SR-LF-WH\u003c\/a\u003e\/and Ivory\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003c\/div\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246995439681,"sku":"FL-B200SRLFI","price":142.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/0f98d221-fl-b200srlfi_lg.jpg?v=1775081058"},{"product_id":"fire-lite-b300-6-iv-6-base-standard-flanged-low-profile-mounting-base-white","title":"Fire-Lite B300-6-IV 6\" Base, Standard Flanged Low-Profile Mounting Base, White","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003eThe B300-6-IV is an Ivory, 6” base, standard flanged low-profile mounting base.\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003e\u003c\/h3\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eMultiple base formats meet application requirements\u003c\/li\u003e\n\u003cli\u003eSEMS screws provide easy wiring connection\u003c\/li\u003e\n\u003cli\u003eDiameter: 6.1\" (15.49 cm)\u003c\/li\u003e\n\u003cli\u003eWire gauge: 12 to 24 AWG Wire gauge\u003c\/li\u003e\n\u003cli\u003eTemperature range: -4°F to 150°F (-20°C to 66°C)\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 15 to 32 VDC\u003c\/li\u003e\n\u003cli\u003eStandby current: 170 µA maximum\u003c\/li\u003e\n\u003cli\u003eApplication driven feature sets\u003c\/li\u003e\n\u003cli\u003eSounder bases both UL 268 and UL 464 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246996684865,"sku":"FL-B3006IV","price":37.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/c6960109-fl-b3006iv_lg.jpg?v=1775080910"},{"product_id":"fire-lite-b501-white-4-standard-european-flangeless-mounting-base-ul-ulc-listed-white","title":"Fire-Lite B501-WHITE 4\" Standard European Flangeless Mounting Base, UL\/ULC Listed, White","description":"\u003cdiv id=\"pdp_productoverview\" class=\"rd-hyg-etl-wrapper\"\u003e\n\u003cb\u003eTo meet local code and application requirements,\u003c\/b\u003e System Sensor offers standard 4\" and 6\" bases, as well as, specialty base designs including relay, isolator, sounder and low frequency sounder options for Select Series detectors. The standard 4\" and 6\" bases offer a plug-in detector base intended for use in intelligent systems, with screw terminals provided for power (+ and -), and remote annunciator connections. Communication takes place over the power (+ and -) lines.\u003c\/div\u003e\n\u003cdiv class=\"rd-hyg-etl-wrapper\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"rd-hyg-etl-wrapper\"\u003eThe 4\" base offers a compact design while the 6\" base provides compatibility with a wider range of junction boxes. The Select Series specialty bases support application driven requirements. The bases employ a separate mounting plate that installs on various junction box sizes to eliminate unsightly surface-mount boxes. The mounting plate enables pre-wiring of all connections to speed and simplify installation.\u003c\/div\u003e\n\u003cdiv class=\"rd-hyg-etl-wrapper\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"rd-hyg-etl-wrapper\"\u003eRelay bases (B224RB-WH\/B224RB-IV) provide one form C contact relay for control of auxiliary functions, such as door closure and elevator recall. The relay can operate in two different modes (short and long delay). The activation time for the short delay is 60 ms to 100 ms, while the activation time for the long delay is 6 sec to 10 sec. A shunt with pin headers, located on the base PC board, is used to set the delay timing. Isolator bases (B224BI-WH\/B224BI-IV) allow the Signaling Line Circuit (SLC) loop to operate under fault conditions created from a short circuit preventing an entire communication loop from being disabled. The base isolates the section of the loop containing the short circuit from the remainder of the circuit and automatically restores when the fault is corrected.\u003c\/div\u003e\n\u003cdiv class=\"row headername non-etl-overview\" style=\"box-sizing: border-box; outline: none !important; padding: 0px; width: auto; max-width: none; font-size: 16px; line-height: 1.63; font-family: 'Nunito Sans', sans-serif; color: #000000; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: #ffffff; text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial; margin: 0px 0px 20px !important 0px;\"\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"item-header rd-hyg-item-header\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv class=\"rd-feature-bullets-non-etl\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eSEMS screws provide easy wiring connection\u003c\/li\u003e\n\u003cli\u003eSupport for 12-24 AWG provides installation flexibility\u003c\/li\u003e\n\u003cli\u003eMultiple base formats meet application requirements\u003c\/li\u003e\n\u003cli\u003eStandard white color with ivory and black options\u003c\/li\u003e\n\u003cli\u003eUL 268 compliant\u003c\/li\u003e\n\u003cli\u003eMechanical locking feature restricts removal of attached sensor head\u003c\/li\u003e\n\u003cli\u003ealso available in ivory\u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/fire-lite-b501-iv-4-flangeless-mounting-base\/\" rel=\"noopener\" target=\"_blank\"\u003e B501-iv\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Fire-lite Alarms By Honeywell","offers":[{"title":"Default Title","offer_id":43246998618177,"sku":"FL-B501WHITE","price":38.8,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/FL-B501WHITE_lg.jpg?v=1770764771"},{"product_id":"dsc-mxbase-addressable-mx-fire-base-for-mx916-mx926-mx936-detectors","title":"DSC MXBASE Addressable MX Fire Base for MX916, MX926, MX936 Detectors","description":"\u003cdiv class=\"sc-bczRLJ iwaCMW\"\u003eThe DSC MXBASE is a 4\" (10.16cm) mounting base for DSC MX916, MX926, and MX936 addressable photo smoke\/heat, photo smoke, and heat detectors. An MXBASE is required for each of these detectors. This allows each detector to connect to the \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/dsc-hsm3105mx-interface-for-mx-loop-max-124-mx-devices\/\" rel=\"noopener\" target=\"_blank\"\u003eHSM3105\u003c\/a\u003e MX Expansion Module. The wiring for these detectors will be between the MXBASE and the HSM3105.\u003c\/div\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003e\u003c\/h3\u003e\n\u003ch3 class=\"TypographyStyle--11lquxl bMPEkV titleText\" data-test-selector=\"OverviewTitle\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ iKBAtS\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBase for \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/dsc-mx916-addressable-mx-smoke-and-heat-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eMX916\u003c\/a\u003e, \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/dsc-mx926-addressable-mx-smoke-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eMX926,\u003c\/a\u003e \u003ca href=\"https:\/\/www.fireandsafetyplus.com\/product\/dsc-mx936-addressable-mx-heat-detector\/\" rel=\"noopener\" target=\"_blank\"\u003eMX936\u003c\/a\u003e detectors\u003c\/li\u003e\n\u003cli\u003e4 terminals for loop connection\u003c\/li\u003e\n\u003cli\u003eLED aperture\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"DSC","offers":[{"title":"Default Title","offer_id":43250869436481,"sku":"3W-MXFBASE","price":12.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/c092ef12-3w-mxfbase.jpg?v=1770762392"},{"product_id":"kidde-kc2-sb-standard-smoke-detector-base-compatible-with-aegis-2-0-and-aegis-xlt","title":"Kidde KC2-SB Standard Smoke Detector Base, Compatible with AEGIS 2.0 and AEGIS-XLT","description":"\u003cp class=\"ai-optimize-31 ai-optimize-introduction\"\u003eThe Kidde KC2-SB Standard Smoke Detector Base is used to connect Optica KC2 series conventional detectors to compatible fire alarm initiating device circuits (IDCs). The detector base also provides terminals for connecting a remote alarm indicator.\u003c\/p\u003e\n\u003ch4 class=\"ai-optimize-32\"\u003e Main Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli class=\"ai-optimize-33\"\u003eCompatible with AEGIS 2.0 and AEGIS-XLT\u003c\/li\u003e\n\u003cli class=\"ai-optimize-34\"\u003eConnects Optica KC2 series detectors to fire alarm circuits\u003c\/li\u003e\n\u003cli class=\"ai-optimize-35\"\u003eIncludes terminals for remote alarm indicator\u003c\/li\u003e\n\u003cli class=\"ai-optimize-36\"\u003eStandard smoke detector base design\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43250898927681,"sku":"ED-KC2SB","price":12.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/bad079e9-ed-kc2sb.jpg?v=1770761268"},{"product_id":"kidde-kc2-sb4-standard-smoke-detector-base-with-trim-skirt-terminals","title":"Kidde KC2-SB4 Standard Smoke Detector Base with Trim Skirt, Terminals","description":"\u003cp\u003eThe Kidde KC2-SB4 Standard Smoke Detector Base is used to connect Optica KC2 series conventional detectors to compatible fire alarm initiating device circuits (IDCs) that use 4-inch square electrical boxes. The detector base provides terminals for connecting a remote alarm indicator and includes a SIGA-TS4 trim skirt.\u003c\/p\u003e\n\u003ch4\u003eMain Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eStandard Base\u003c\/li\u003e\n\u003cli\u003e4 Terminals\u003c\/li\u003e\n\u003cli\u003e6\" Diameter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43250898960449,"sku":"ED-KC2SB4","price":12.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/3e3542cf-ed-kc2sb4.jpg?v=1770761397"},{"product_id":"kidde-kc2-rb4-2-wire-4-detector-mounting-base-with-relay-trim-skirt-white","title":"Kidde KC2-RB4 2-Wire 4\" Detector Mounting Base with Relay Trim Skirt, White","description":"\u003cp\u003eThe Kidde KC2-RB4 2-Wire 4\" Detector Mounting Base includes a relay. Normally Open or Normally Closed operation is selected during installation. The dry contact is rated for 1 amp (pilot duty) at 30 Vdc. The relays position is supervised to avoid accidentally jarring it out of position. The KI-RB can be operated as a control relay if programmed to do so at the control panel. The relay base does not support the GSA-LED Remote LED\u003c\/p\u003e\n\u003ch4\u003eKidde KC2-RB4 2-Wire 4\" Detector Mounting Base Main Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThe dry contact is rated for 1 A (pilot duty) at 30V DC\u003c\/li\u003e\n\u003cli\u003eThe relays position is supervised to avoid accidentally jarring it out of position\u003c\/li\u003e\n\u003cli\u003eThe relay base does not support the GSA-LED Remote LED.\u003c\/li\u003e\n\u003cli\u003eFM Approved\u003c\/li\u003e\n\u003cli\u003eCalifornia State Fire Marshal Listed\u003c\/li\u003e\n\u003cli\u003ecULus Listed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43250898993217,"sku":"ED-KC2RB4","price":38.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/9aaed6cf-ed-kc2rb4.jpg?v=1770761260"},{"product_id":"kidde-kc2-rb-2-wire-detector-mounting-base-with-relay-white","title":"Kidde KC2-RB 2-WIre Detector Mounting Base with Relay, White","description":"\u003cp\u003eThe Kidde KC2-RB 2-WIre Detector Mounting Base includes a relay. Normally Open or Normally Closed operation is selected during installation. The dry contact is rated for 1 amp (pilot duty) at 30 Vdc. The relays position is supervised to avoid accidentally jarring it out of position. The KI-RB can be operated as a control relay if programmed to do so at the control panel. The relay base does not support the GSA-LED Remote LED\u003c\/p\u003e\n\u003ch4\u003eKidde KC2-RB 2-WIre Detector Mounting Base Main Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDual Rate-of-Rise and Fixed-Temperature Sensor\u003c\/li\u003e\n\u003cli\u003eSelf-diagnostic capability continually monitors operation\u003c\/li\u003e\n\u003cli\u003eCompatible with Kidde Fire Systems AEGIS 2.0 and AEGIS-XLT Conventional Control Units\u003c\/li\u003e\n\u003cli\u003eRemote LED indicator available\u003c\/li\u003e\n\u003cli\u003eLow-profile design blends into the ceiling\u003c\/li\u003e\n\u003cli\u003eFM Approved\u003c\/li\u003e\n\u003cli\u003eCalifornia State Fire Marshal Listed\u003c\/li\u003e\n\u003cli\u003ecULus Listed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kidde","offers":[{"title":"Default Title","offer_id":43250899058753,"sku":"ED-KC2RB","price":39.04,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/775ea4c5-ed-kc2rb.jpg?v=1771466065"},{"product_id":"potter-pad300-sb-6-addressable-sounder-base-low-profile-surface-mount-independent-device-white","title":"Potter PAD300-SB 6\" Addressable Sounder Base, Low profile, Surface-mount, Independent device, White","description":"\u003cp\u003eThe Addressable Sounder Base (PAD300-SB) is a sounder base that may be utilized in a variety of applications. The base has a locking feature for the detector that may be used or removed in the field. Once the detector is removed, the sounder is accessible in the bottom of the unit.\u003c\/p\u003e\n\u003cp\u003e The base has an independent sounder module that may be programmed as a single station, zone or all call sounder. The PAD300-SB passes through the sound pattern sent to the sounder, therefore it may reproduce in any pattern the power supply provides. The panel will support any combination of detectors or modules on the SLC.\u003c\/p\u003e\n\u003cp\u003eThe PAD300-SB does not consume an address on the loop and is fully programmable to operate with any input. Once activated the sounder will also follow the input from the power source and deactivate accordingly.\u003c\/p\u003e\n\u003ch4\u003eMain Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eUUKL Listed for Smoke Control\u003c\/li\u003e\n\u003cli\u003eDoes not require SLC Loop address\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12 AWG wire sizes\u003c\/li\u003e\n\u003cli\u003eIntegrated Sounder in base\u003c\/li\u003e\n\u003cli\u003eUL464 and UL268 Listed\u003c\/li\u003e\n\u003cli\u003eSounder independent of detector, allows for a single station, grouped or all-call\u003c\/li\u003e\n\u003cli\u003eMay be mapped to any device connected to the control panel\u003c\/li\u003e\n\u003cli\u003eLED to indicate that the unit is active\u003c\/li\u003e\n\u003cli\u003eSeparation included in the base for high and low voltage and power limited\/non-power limited connections\u003c\/li\u003e\n\u003cli\u003eSupports Class A, Class X and Class B wiring\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43250921209921,"sku":"PL-PAD30SB","price":83.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/101ddd50-pl-pad30sb-1.jpg?v=1770761160"},{"product_id":"fire-lite-b200s-intelligent-addressable-sounder-base-ivory","title":"Fire-Lite B200S-IV Intelligent Addressable Sounder Base for Smoke Detectors","description":"\u003ch4\u003eFire-Lite B200S Intelligent Addressable Sounder Base,\u003c\/h4\u003e\n\u003cp\u003eThe B200S sounder and -LF sounder bases (B200S-WH\/B200S-IV\/ B200S-LF-WH\/B200S-LF-IV) adopt the same address as the detector, but use a unique device type on the loop. The Fire Alarm Control Panel (FACP) can use that address to command an individual sounder — or a group of sounders — to activate.\u003c\/p\u003e\n\u003cp\u003eTailor the command set from the FACP to multiple event-driven tone outputs allowing selection of volume (75 or 85 dBA), tone (ANSI Temporal 3, ANSI Temporal 4, or March Time) and group. In addition, some FACPs will enable custom tone patterns. The B200S series sounder bases recognize the System Sensor synchronization protocol.\u003c\/p\u003e\n\u003cp\u003eThis enables them to be used as a component of the general evacuation signal — along with other System Sensor AV appliances — when connected to a power supply or FACP output capable of generating the System Sensor synchronization pulses.\u003c\/p\u003e\n\u003ch4\u003eAddressable Sounder Base Main Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003e SEMS screws provide easy wiring connection\u003c\/li\u003e\n\u003cli\u003e Support for 12-24 AWG provides installation flexibility\u003c\/li\u003e\n\u003cli\u003e Multiple base formats meet application requirements\u003c\/li\u003e\n\u003cli\u003e Standard white color with ivory and black options\u003c\/li\u003e\n\u003cli\u003e UL 268 compliant\u003c\/li\u003e\n\u003cli\u003e Mechanical locking feature restricts removal of attached sensor head\u003c\/li\u003e\n\u003cli\u003ePre-wired mounting plate simplifies installation\u003c\/li\u003e\n\u003cli\u003eAvailable in White and Ivory\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fire and Safety Plus","offers":[{"title":"Default Title","offer_id":43262294949953,"sku":"FL-B200SIV","price":95.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/a8ea360e-21noldtyixl_7d9c10ec-423b-4a2d-a047-30f559b70a65.jpg?v=1770772508"},{"product_id":"fire-lite-b224rb-relay-base-ivory","title":"Fire-Lite B224RB Relay Base - Ivory","description":"\u003cdiv class=\"sc-bczRLJ blswqV\"\u003e\u003cspan class=\"TypographyStyle-sc-11lquxl bLpGkr\"\u003eB224RB Detector Relay Bases are designed for use with 200 Series detectors, and provide a single Form C contact relay for the control of auxiliary functions, such as door closures and elevator recall.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv id=\"pdp-overview-details\" aria-hidden=\"false\" class=\"sc-bczRLJ hiOsDu\"\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003e\u003c\/h3\u003e\n\u003ch3 data-test-selector=\"OverviewTitle\" class=\"TypographyStyle-sc-11lquxl eqAZfL titleText\"\u003eMain Features\u003c\/h3\u003e\n\u003cdiv class=\"sc-bczRLJ ibJhda\"\u003e\n\u003cul class=\"mainfeatureslist\"\u003e\n\u003cli\u003eBases enable quick and secure detector plug-in\u003c\/li\u003e\n\u003cli\u003eSEMS screws provide easy Wiring connection\u003c\/li\u003e\n\u003cli\u003eSupport for 24 to 12 AWG provides installation flexibility\u003c\/li\u003e\n\u003cli\u003eMultiple accessory options provide mounting flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Fire and Safety Plus","offers":[{"title":"Default Title","offer_id":43262299373633,"sku":"FL-B224RBIV","price":70.68,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/6600ebc6-41gecdtr1rl_6b53588b-6f4c-40b3-9bc3-c410cd9189e9.jpg?v=1773110062"},{"product_id":"fire-lite-b200s-lf-programmable-sounder-base-white","title":"Fire-Lite B200S-LF Programmable Sounder Base Color: white","description":"\u003ch4 class=\"product-title-description ai-optimize-33\"\u003eFire-Lite B200S-LF-IV and B200S-LF-WH Low Frequency Intelligent, Programmable Sounder Base,\u003c\/h4\u003e\n\u003cp class=\"ai-optimize-34 ai-optimize-introduction\"\u003eThe B200S-LF-WH and\u003ca href=\"https:\/\/www.firelite.com\/en-US\/documentation\/Documents\/B200S-LF_Manual_I56-4151.pdf\" rel=\"noopener\" target=\"_blank\"\u003e B200S-LF-IV\u003c\/a\u003e sounder bases are used with addressable detector heads. Refer to the appropriate manual for more information on sensors. The B200S-LF-WH\/B200S-LF-IV low frequency sounder base generates a low frequency tone around 520 Hz.\u003c\/p\u003e\n\u003cp class=\"ai-optimize-34 ai-optimize-introduction\"\u003eThe B200S-LF-WH\/B200S-LF-IV offers maximum flexibility in configuration and operation to meet or exceed the requirements of UL268 and UL464 for Continuous, Temporal 3 and March time patterns. The temporal 4 pattern meets all requirements of UL268 and UL2075, as well as, private mode setting of UL 464.\u003c\/p\u003e\n\u003ch4 class=\"ai-optimize-35\"\u003e\u003cstrong\u003eMain Features\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli class=\"ai-optimize-36\"\u003eBase Diameter: 6.875\" (17.46 cm)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-37\"\u003eBase Height (less sensor): 2.0\" (5.08 cm)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-38\"\u003eExternal Supply Voltage: 16 to 33 VDC (VFWR)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-39\"\u003eStandby Current: 550 µA maximum VDC\u003c\/li\u003e\n\u003cli class=\"ai-optimize-40\"\u003eSLC Operating Voltage: 15 to 32 VDC\u003c\/li\u003e\n\u003cli class=\"ai-optimize-41\"\u003eSLC Standby Current: 300 µA maximum (base only, refer to applicable sensor specification)\u003c\/li\u003e\n\u003cli class=\"ai-optimize-45\"\u003eThe detector should be cleaned at least once a year.\u003c\/li\u003e\n\u003cli class=\"ai-optimize-46\"\u003eAvailable in Ivory and White\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Fire and Safety Plus","offers":[{"title":"Default Title","offer_id":43262300356673,"sku":"FL-B200SLFWH","price":140.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/7d13b474-41oaeb4i2nl.jpg?v=1775081058"},{"product_id":"potter-pad300-lfsb-addressable-low-frequency-sounder-base","title":"Potter PAD300-LFSB Addressable Low Frequency Sounder Base","description":"\u003cp\u003eThe Addressable Low Frequency Sounder Base (PAD300-LFSB) is a sounder base that may be utilized in a variety of applications. The base has a locking feature for the detector that may be used or removed in the field. Once the head is removed, the sounder is accessible in the bottom of the unit. \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eMain Features\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAddressable low frequency sounder base, allows for single station, grouped or all call activation\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMay be mapped to any device connected to the control panel\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTerminals accept 22 to 12 AWG wire sizes\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports Class A, Class X and Class B wiring\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDoes not require SLC Loop address, uses PAD sub point addressing feature\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComplies with the Low Frequency Signal Requirements per NFPA 72 and UL 464 for\u003c\/li\u003e\n\u003cli\u003eAudible Signaling Devices\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e24VDC Sounder base power connection supervised internally by each sounder base;\u003c\/li\u003e\n\u003cli\u003eNo external power supervision relays required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUUKL Listed for smoke control\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Potter","offers":[{"title":"Default Title","offer_id":43262483103809,"sku":"PL-PAD300LFB","price":138.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/files\/pl-pad300lfb.jpg?v=1772469569"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0700\/2465\/9009\/collections\/3e3542cf-ED-KC2SB4.jpg?v=1768226736","url":"https:\/\/www.fireandsafetyplus.com\/collections\/detector-bases.oembed?page=2","provider":"Fire and Safety Plus","version":"1.0","type":"link"}